Installation Guide

Install the brazed plate heat exchanger in counter flow direction:

To keep lower water volume below the connector.

Install the brazed plate heat exchanger in counter flow direction:

To achieve high thermal efficiency and high heat transfer rate.

Install the brazed plate heat exchanger in counter flow direction:

For different ways of mounting the Brazed Plate Heat Exchanger

Cleaning:

  • The solution used should be a weak acid solution with concentration less than 5%, citric acid for example.
  • Should the acid concentration be too high, the copper and stainless steel inside could be etched or corroded.
  • Flush the Brazed Plate Heat Exchanger with large amounts of fresh water before restarting the system in order to purge any remaining acid solution.

User Manual Download

DOWNLOAD